1.Product usage and applicable standard
This test chamber is mainly used to check whether the shell and seal of electronic and electrical products can guarantee the good working performance of equipment and components after water test or during the test. It conforms to gb2423.38, GB4208-93, IEC60529-2001 and other standards.
2. The composition and characteristic of the system:
The test system is compos ed of water tank, spray system, consisting of the control unit. Its use of advanced control unit by the PLC+ touch screen + all kinds of electrical control components; thereby achieving a machine to complete the IP3, IP4, IP5, IP6 four standard test.
3.Device Specification:
Model |
FS-IPX34 |
FS-IPX3-6 |
FS-IPX9K |
Waterproof grade |
IPX3、IPX4 |
IPX3、IPX4、IPX5、IPX6 |
IPX9K |
Internal dimension |
100×100×100 (cm) |
||
Swing pipe radius |
40cm |
||
IPX3/IPX4 Splash water test |
swing pendulum :0~±160°adjustable Nozzle aperture:0.4mm or 0.8mm Nozzle flow rate:0.07L/min;Sample disk:1~7 circle/min Spraying time:0~9999min can be set Control system:PLC programming control system + touch screen of Chinese interface |
||
IPX5 Flush test |
Nozzle aperture:6.3mm;Discharge:12.5L/min Water spray distance:2.5~3m;Duration::0~9999min |
||
IPX6 Flush test |
Nozzle apertureoles:12.5mm; Water flow rate:100L/min Water spray distance:2.5~3m; Duration:0~9999min |
||
IPX78 Water immersion |
Pressure adjustment range :0-0.3/0.5/1.0/2.0/5.0Mpa Test water depth range: 0-30m/50m/100m/200m/500m |
||
IPX9K Jet waterproof test |
Inject pressure:80~100bar/8~10Mpa/100kg Spray flow 14~16L/min Spray distance 100mm~150mm Spray angle 0°、30°、60°、90° Turn table speed 1~5r/min |
Mechanical environmental testing