1. Device introduction:
The equipment is suitable for the strength test of inserting and pulling out of various connectors. Combined with the patented automatic alignment device, it can obtain completely accurate plugging force; The self-developed patent test software based on Windows operating system can realize the input setting of all parameters and test conditions; Such as test data, load displacement curve, life curve and inspection report, which are automatically generated after the test; In addition to the routine plug-in test, the machine can also perform the tension and pressure test of timing, fixed force and positioning movement. The contact resistance measurement module is configured to record and measure the contact resistance, so as to accurately determine its actual service life.
2. Device characteristic:
2.1It can print stored graphics ( plug displacement curve, the life curve diagram, check report )
2.2The test conditions are set by the computer tableau, convenient and fast (including swap stroke, speed, pause time )
Model No. |
7220SR |
7220SR-SW |
|
Effective width |
240mm |
400mm |
|
Maximum stroke |
150mm |
300mm |
|
Capacity selection |
5,10,20,50KG |
||
load resolution |
0.01(kg、lb、N、g) |
||
Load precision |
± 0.5% |
||
Test speed |
0.1~500 mm/min |
||
X.Y axis move range |
0-75mm |
||
Automatic aligning device The automatic aligning device |
YES |
||
Impedance measure range |
1-3000mΩ |
||
Communication interface |
RS232 |
||
Device size |
L40*W30*H96cm |
L60*W40*H155cm |
|
Device weight |
78kg |
100kg |
|
Power supply |
AC220V/50Hz/5A or AC110V/60Hz/10A |
Mechanical environmental testing