Utility model patent: Energy saving temperature control system ZL2019221942311.1 for high and low temperature alternating humidity test chamber
Utility model patent: Energy saving refrigeration system ZL201922189626.2 for high and low temperature alternating wet heat test chamber
Software copyright: Measurement and control software for linear 25 degree min temperature rise and fall rate temperature cycle test box (N0.3459558)
CE Safety Certification: High and Low Temperature Alternating Damp Heat Test Chamber AT58250SC01008502
1.Device introduction:
Thermal cycle test chamber using: At a specific temperature and low temperature range, the sample is subjected to temperature changes at a particular rate and through constant cycles; To reliability evaluation of sample resistance to temperature change or remove the stress of the welded parts gathered in electronic products. Applicable to metal and plastic, rubber, electronic components and other kinds of materials or automotive electronics, avionics, military and consumer electronic products.
2. Device features :
2.1. The control software developed by the company "measurement and control software n0.3459558 of linear 25 degree min temperature rise and fall rate temperature cycle test chamber" is adopted, combined with the patented energy-saving technology of utility model "an energy-saving refrigeration system zl201922189626.2 of high and low temperature alternating damp heat test chamber". Compared with the traditional control mode in the same industry, the energy consumption of the equipment is reduced by 30%;
2.2. More than 2400 hours of single fault free continuous operation; The operating life of the whole machine is more than 100000 hours, the safety performance has passed the EU CE safety inspection certification (CE certificate: at58250sc01008502).
3.Device specification:
Model No. |
RTC-II-225GE5/10/15/20/25 |
RTC-II-408GE5/10/15/20/25 |
RTC-II-1000GE5/10/15/20/25 |
Internal volume |
225L |
408L |
1000L |
Internal size |
W60×H75×D50cm |
W80×H85×D60cm |
W100×H100×D100cm |
External size |
W120×H210×D180cm |
W128×H215×D208cm |
W128×H225×D220cm |
Rapid temp. change rang |
-70℃~+180℃ |
||
Temperature fluctuation |
≦±0.5℃ |
||
Temp. uniformity |
≤2.0℃ |
||
Temp. deviation |
≦±2.0℃ |
||
Heating /cooling rate |
Routine: 5°C/min; 10°C/min; 15°C/min,20°C/min, 25°C/min and can be customized |
Mechanical environmental testing