Thermal shock test chamber for 3 Temp. zone structure-深圳市鼎准电子有限公司

Equipment Introduction

1．Device introduction：

Thermal shock test chamber is used to test all kinds of raw materials or finished products under the continuous instantaneous conversion of extreme high temperature and extreme low temperature. To evaluate the reliability of physical， chemical and electrical properties of raw materials or finished products.

2.Device features:

2.1. The key parameters of the equipment, such as temperature deviation, fluctuation, temperature uniformity, test chamber air reset time, and sample surface reset time, meet the relevant requirements of IEC60068 and can completely replace similar products in Europe, America, and Japan.

2.2. More than 2400 hours of single fault free continuous operation; The operating life of the machine is more than 100000 hours, the safety performance has passed the EU CE safety inspection certification (CE certificate: AT58250SC01000086)。

3.Device specification：

Model No.	TS-III-100A/B	TS-III-200A/B	TS-III-300A/B	TS-III-400A/B	TS-III-1000A/B a/B
Internal volume	100L	200L	300L	400L	1020L
Internal size	W50H40D50cm	W60H60D56	W70H60D71cm	W75H75D71cm	W120H100D85cm
External size	W150H184D198cm	W150H203D222	W164H204D262cm	W170H220D262cm	W220H250D260cm
Device weight	1000kg/1200kg	1300kg/1700kg	1500kg/1800kg	2000kg/2200kg	2200kg/2500kg
Temp. zone structure	3 temp. zone structure it is divided into three parts: heat storage area，cold storage area and test area. The 3 temp. zone are independent，and the temperature is switched through the valve.
Shock test mode	Shock mode 1: Low temperature → Room temperature → high temperature→Room temperature → low temperature or High temperature →normal temperature→ low temperature→ normal temperature→high temperature; so reciprocating cycle; Shock mode 2: Low temperature→high temperature →low temperature or high temperature→low temperature → high temperature; so reciprocating cycle

About Us

Product

News

Download